/*
 * This ESP32 code is created by esp32io.com
 *
 * This ESP32 code is released in the public domain
 *
 * For more detail (instruction and wiring diagram), visit https://esp32io.com/tutorials/esp32-soil-moisture-sensor-pump
 */

#define RELAY_PIN    17 // ESP32 pin GPIO17 that connects to relay
#define MOISTURE_PIN 36 // ESP32 pin GPIO36 (ADC0) that connects to AOUT pin of moisture sensor
#define THRESHOLD 500   // => CHANGE YOUR THRESHOLD HERE

void setup() {
  Serial.begin(9600);
  pinMode(RELAY_PIN, OUTPUT);
}

void loop() {
  int value = analogRead(MOISTURE_PIN); // read the analog value from soild moisture sensor

  if (value < THRESHOLD) {
    Serial.print("The soil moisture is DRY => activate pump");
    digitalWrite(RELAY_PIN, HIGH);
  } else {
    Serial.print("The soil moisture is WET=> deactivate the pump");
    digitalWrite(RELAY_PIN, LOW);
  }

  Serial.print(" (");
  Serial.print(value);
  Serial.println(")");

  delay(1000);
}

https://esp32io.com/tutorials/esp32-soil-moisture-sensor-pum

const int potPin = 2;

// variable for storing the potentiometer value
int potValue = 0;

void setup() {
  analogReadResolution(8);
  Serial.begin(115200);
  delay(1000);
}

void loop() {
  // Reading potentiometer value
  potValue = analogRead(potPin);
  Serial.println(potValue);
  delay(500);
}